Oculus Rift DK2

From XVRWiki
(Redirected from DK2)
Jump to navigation Jump to search
An Oculus Rift Development Kit 2 headset

The Oculus Rift DK2 is a VR headset from Oculus.

It has a flat focus. Its design is a refinement of the Oculus Rift DK1. It is a more basic headset compared to the Oculus Rift CV1. It has higher resolution than the DK1.

It has larger lenses than the DK1, which results in higher field of view, but you can see the black display edges. The resolution of the display is higher.

It uses a Galaxy Note 3 screen.[1]

The DK2 has the same facial interface as the DK1.

The DK2 has support for basic 6DOF tracking using constellation.

It has an IPD of 63.5mm.[2][3]

The Oculus Rift DK2 design files are open source at Github.

The lenses are made of polymer.

Specifications[edit]

Part Spec
Display 5.7 inch OLED (PenTile)
Resolution 1920 x 1080, 960 x 1080 per eye
Refresh Rate 75 Hz, 72 Hz, 60 Hz
Persistence 2 ms, 3 ms, full
Field of View 100° (nominal)
Interaxial Distance 63.5mm
Tracking 6 degrees of freedom
Rotational Tracking Gyroscope, Accelerometer, Magnetometer
Positional Tracking Separate Camera Near Infrared CMOS Sensor
Update Rate Rotational: 1000 Hz Positional: 60 Hz
Tracking Volume 72°H x 52°V (8.2 feet range)
Latency ~30 ms
Connectivity USB, HDMI
Weight .97 lbs (440g)

Specs From Oculus DK2 Website[4]

Lenses[edit]

The DK2 has two sets of lenses: A and B. The housing design is the same as the DK1. It uses a twist and click mechanism.[5]

The focal length of the B lens is approximately 45 millimeters.[6]

Primary vendors of components used[edit]

  • Vishay
  • STMicroelectronics
  • Toshiba
  • Richtek
  • InvenSense
  • Samsung Display
  • Berway
  • Jabil
  • Elka
  • Cypress
  • Coxon
  • Aptina
  • Etron
  • Boowon[2]

References[edit]