Changes

==Introducing the Knuckles Controllers==

==Introducing the Knuckles Controllers==

The prototype version of the Valve Knuckles controllers was first unveiled at the Steam Dev Days 2016 event. The design of the Knuckles controller created quite a buzz. That’s because, users of Knuckles can let go of the controllers, but it’ll not drop to the ground. Surprisingly, the device doesn’t have a safety cord to strap the controller to the wrist. Additionally, inspired by [[Oculus Touch]], the makers have also included the [[finger tracking]] feature to Knuckles.  

The prototype version of the Valve Knuckles controllers was first unveiled at the Steam Dev Days 2016 event. The design of the Knuckles controller created quite a buzz. That’s because, users of Knuckles can let go of the controllers, but it’ll not drop to the ground. Surprisingly, the gadget doesn’t have a safety cord to strap the controller to the wrist. Additionally, inspired by [[Oculus Touch]], the makers have also included the [[finger tracking]] feature to Knuckles.  

==Hardware==

==Hardware==

==How to Calibrate Finger Tracking on the Knuckles Controller?==

==How to Calibrate Finger Tracking on the Knuckles Controller?==

[[File:valve-knuckles-recalibrate-gif-01.gif|250px|right]]

[[File:valve-knuckles-recalibrate-gif-01.gif|250px|right]]

To calibrate most other controllers, users would have to remove the headset and change the settings through the personal computer. The Knuckles controllers have hassle-free calibration. To calibrate the software, first put on the controller, hold the device and pull the locking cord to tighten the grip, and position each finger where it needs to be – on the respective sensors. Now, release the fingers and keep it open for a second. The device will automatically calibrate itself. To track fingers, the device usually chooses the median result of the previous three calibrations.  

To calibrate most other controllers, users would have to remove the headset and change the settings through the personal computer. The Knuckles controllers have hassle-free calibration. To calibrate the software, first put on the controller, hold the gadget and pull the locking cord to tighten the grip, and position each finger where it needs to be – on the respective sensors. Now, release the fingers and keep it open for a second. The gadget will automatically calibrate itself. To track fingers, the gadget usually chooses the median result of the previous three calibrations.  

==Compatibility with Hardware and Software==

==Compatibility with Hardware and Software==