How to assemble an LED
Jump to navigation
Jump to search
This is a guide on how to assemble an LED.
It requires the following: an LED chip, a leadframe, a conductive attaching material, bonding wire, optional phosphor and epoxy.
A high brightness LED will require a heatsink.
A major step is component attach, also known as die attach. A conductive silver paste can be used.[1]
LED chips can be epoxy attached to aceramic base using 84-1LMISR4, for example.[1]
Each LED can be interconnected using 32-micron gold wires, for example.[1] The wires can be encapsulated using GE IVS4632 silicone, for example.[1] However, wire bonding is not good and should be avoided if possible.
Packaging
Packaging - LED packaging
Processes
- Leadframe packaging
- LED epoxy encapsulation dispensing and forming
- Silver spot plating for lead frames
Suppliers
- Wieland rolled products - for through hole LED leadframe stock
References
- ↑ 1.0 1.1 1.2 1.3 Donald J. Beck. [https://meridian.allenpress.com/ism/article-pdf/2011/1/000117/2343484/isom-2011-ta4-paper1.pdf "Automated Precision Assembly for High-Volume HB LEDs"]. https://meridian.allenpress.com/ism/article-pdf/2011/1/000117/2343484/isom-2011-ta4-paper1.pdf.