Difference between revisions of "Lightfield display"
| Line 17: | Line 17: | ||
To manufacture microlens array-based LFDs, it is recommended to use a large panel of high PPI. The display panel size is recommended to be about 2.5 inches square, with a PPI of over 2000. This results in a recommended resolution of 5000x5000 per eye. | To manufacture microlens array-based LFDs, it is recommended to use a large panel of high PPI. The display panel size is recommended to be about 2.5 inches square, with a PPI of over 2000. This results in a recommended resolution of 5000x5000 per eye. | ||
| − | |||
| − | |||
Instead of using high-PPI displays, it is also feasible to use [[fiber optic image conduit]]s to transport light from a physically larger and high resolution display in a flexible way to a head-mounted apparatus, where microlensing can take place for light field generation. | Instead of using high-PPI displays, it is also feasible to use [[fiber optic image conduit]]s to transport light from a physically larger and high resolution display in a flexible way to a head-mounted apparatus, where microlensing can take place for light field generation. | ||
Revision as of 07:24, 21 July 2024
A light field display is a display that can display a light field, which is light that a person can focus naturally on at a range of distances in the image. The light reaches the viewer from multiple angles at a single viewpoint.
Lightfield displays have been made in a variety of types, including microlens-based, sequential projection, and stacked LCD. An example of a sequential projection display is from CREAL.
A sequential light field display is a display that generates rays one by one, or in groups one after another, and displays to the eye in rapid succession.
A simultaneous light field display is one that displays all of the light all at once.
A light field display that is to solve most vergence-accommodation conflicts needs to display multiple views for each pupil which can theoretically be done using a high angular resolution backlight.[1]
Microlens-based
- For detail about this topic, visit: Microlens-based light-field display
A light field display can be made by putting a microlens array in front of a traditional flat display.[2] This can be done by taking a laptop computer and putting a microlens sheet in front of it.
Manufacturing
A light field display must be lit. For example using high brightness LEDs. The LEDs can be a broad backlight, or they can be the individual pixels or subpixels themselves.
To manufacture microlens array-based LFDs, it is recommended to use a large panel of high PPI. The display panel size is recommended to be about 2.5 inches square, with a PPI of over 2000. This results in a recommended resolution of 5000x5000 per eye.
Instead of using high-PPI displays, it is also feasible to use fiber optic image conduits to transport light from a physically larger and high resolution display in a flexible way to a head-mounted apparatus, where microlensing can take place for light field generation.